BallistiCrete is a protective coating that can be plastered or sprayed onto interior walls. This coating looks completely natural and can be the final finish, although paint will adhere to it and can be applied after the product has completely cured. It can be applied in various thicknesses — and it probably goes without saying that the thicker the coating, the more protection it offers. 

BallistiCrete can be layered at 3/8″ at a time, building up to the desired thickness based on the level of protection required.  BallistiCrete is designed like most other high security measures: to blend in and be discreet.

The application looks much like any regular home or office building procedure. Installation experts arrive with equipment that looks like they’re there to paint or smooth mud over drywall. 

The product itself is mixed onsite, so there are no obviously marked boxes or products being hauled in to alert people to your security measures. They go inside, mix up the BallistiCrete, finish their installation, and they’re gone.

They can even create a textured finish if you’d like. And just like that, your home, office, bedroom, or any other space you can think of, is bulletproof.

Watch the video below to see it in action.

BALLISTICRETE Specs

BALLISTICRETE™ protective coating is an inorganic mixture of mineral binders, high quality fillers, and

fibers with exceptional impact resistance and is based on PlasterMax technologies. The superior ceramic

like strength and hardness qualities are designed to flatten a projectile rapidly upon impact, thereby

creating greater resistance to penetration. It is environmentally sustainable while providing strength,

durability, and economy. It forms a strong bond with many substrate materials such as foam, CMU,

concrete, cement board, brick and stucco with tensile bond strength exceeding the tensile strength of the

substrate in many cases. It can be applied as a single coat from 3/8” or incrementally layered whilst still in

a gel state up to 2” thick depending on application. Heavy duty non combustible glass fiber mesh is

embedded within the material during application. A paint finish is recommended after complete curing has

taken place in 5 days. BallistiCrete is a natural limestone color and is pre-blended, mix with conventional

plaster mixing equipment. It can be pumped and sprayed or hawk and trowelled. BallistiCrete comes in a

2 part package and both are mixed together onsite. Working time is approximately 1 hour at 60-70F.

ENVIRONMENTAL CONSCIOUSNESS

BallistiCrete™ is designed to be environmentally responsible and sustainable. It emits no pollutants even

in contact with fire, no smoke, no flame and no VOC’s. The Product meets emission level requirements of

GREENGUARD product quality testing. BallistiCrete is at minimum 98% silica free, and does not support

the growth of mold and mildew. The Company has just passed official ballistic tests proving it can stop 5

rounds of AK47 bullets in an 8 inch circle when applied over fragile gypsum board or hollow block

construction. Tests were performed by H.P. White Labs in Maryland, an accredited Government approved

testing agency to NIJ Level III AK47 and NIJ Level IV .308 Armor Piercing. The AK47 has been the most

popular terrorist weapon of choice for decades and is used globally by military and civilians and of course

al-Qaeda and now ISIS.

PERFORMANCE BENEFITS

➢ Provides a hard, durable coating over many wall surfaces, over 8500 PSI compressive strength (Per

ASTM C109)

➢ Applies directly over EPS foam, existing stucco, cement board, CMU blocks or wood substrates.

➢ Noncombustible building material (Per ASTM E136)

➢ Zero flame spread, and zero smoke developed indices (Per ASTM E84)

➢ Resistant to mold and mildew growth (Per ASTM G21)

➢ When applied over EPS foam, BallistiCrete™ meets ICC building code required fire protection

requirements (Per UBC 26-3; NFPA 286; and IBC Section 803.2.1, Corner Room Fire Tests).

➢ Meets all the emission level requirements of the GREENGUARD Product Quality

➢ Can be applied to create both smooth and textured finishes; and, it can be painted.

➢ Pre-formulated mix, needs only mixing on site

➢ Mix and apply using pumps/sprayers or hawk and trowel